Wholesale BSM BSA BSD Radar For Vehicle Blind Spot Assist Corner Radar Sensor

Unique Technology 2nd generation blind spot detection system is based on 24Ghz 1T4R technology. This Blind Spot Assist use corner radar sensors to monitor the blind spot area behind the vehicles, the system provide the audible “BIBI” warning and visible warning through indicators. When a moving object enters the monitor area, the LED light will be lit to alert the driver. At the same time, turn on the turning signal on the corresponding side, the corresponding LED indicator will blinker and 3 beeps to warn the driver that there is a moving object approaching, there is dangerous to change lanes at this time. And the radars have ability to locate the target precisely also, to get rid false alarm from third lane and right behind. It also consists of RCTA and DOW function, which elimates blind zones effectively  to improve driving more safety.

✧ Features:

☛ Warning method：beep and LED light;
☛ Working condition: after ACC on;
☛ Small sensor size: 69*62*22mm;
☛ Adjustable installation angle for various vehicle types;
☛ Small sensor connector and easy pass through;
☛ Bracket installation method optional: screw or stick;
☛ Waterproof sensor: IP67;
☛ Buzzer size: 60*41*16mm;
☛ Optional installation method: screw or stick.

✧ Specification

✧ Wiring Diagram

✧ Functions:
☛ Left and right side blind zone (BSD):
①. When a moving vehicle is detected approaching within 12m of the blind zone
on the rear left or rear right of the vehicle, the left or right will be lit.
②. If the left or right turn signal lights are turned on at this time, the left or
right indicator will blinker and provide (bi bi bi)
☛ Lane changing assist (LCA):
①. When the vehicle speed >10km/h, the LCA function will start;
②. The relative speed of the side and rear is v<10m/s, and the TTC time is 2.5s;
③. The relative speed behind the side is 10m/s<v<15m/s, and the warning time
is 3s;
④. Prewarning mode: when the target meets the alarm conditions and the turn
signal is activated, the LED blinkers and the buzzer (bi bi bi) alerts.
☛ Rear cross traffic alert (RCTA):
①. Provide warning for crossing targets within a lateral distance of 25 meters
and 4 meters behind the vehicle. If a target enters, the LED indicator blinker and provide
buzzer alert (bi bi bi).
☛ Door open warning (DOW):
①. When the vehicle is parked and the door is open, if a target appears within
25 meters behind the side of the vehicle, if the driver performs the door opening
operation, the LED will blink and the buzzer will provide a “bi bi bi” warning.
Door open warning (DOW) setup requirement:
①. DOW function on (default);
Note: When the door is open, the door status cable power is 0V; and when the door is
closed, the door status cable is 12V. (If door open signal is not found, please connect it
to 12V)

✧ Installation

☛  How to install 24Ghz 1T4R blind spot detection system?