Unique Technology 1st generation BSD system is based on 24Ghz 1T1R technology. This blind spot monitors use corner radar sensors to monitor the blind spot area behind the vehicles, the system provide the audible “BIBI” warning and visible warning through indicators. The radars achieve the BSD function perfectly with low cost solution. It monitors blind zone and helps drivers to improve driving safety effectively.
☛ Adjustable installation angle for various vehicle types;
☛ Small sensor connector and easy pass through;
☛ Bracket installation method optional: screw or stick;
This product is a blind spot assistance system that uses two 24Ghz millimeter wave radars installed on the rear bumper of the vehicle to detect moving objects within a range of 6 to 12 meters from the rear side of the vehicle. When a moving object enters the monitor area, the LED light will be lit to alert the driver. At the same time, turn on the turning signal on the corresponding side, the corresponding LED indicator will blinker and 3 beeps to warn the driver that there is a moving object approaching, there is dangerous to change lanes at this time.
✧ Features:
☛ Small sensor size: 69*62*22mm;
☛ Waterproof sensor: IP67;
☛ Buzzer size: 60*41*16mm;
☛ Optional installation method: screw or stick;
☛ Warning method：beep and LED light;
☛ Working condition: after ACC on.
✧ Specifications
| Item | Parameter |
|---|---|
| Working Temperature | -20°C ~ 70°C℃ , RH95％ MAX |
| Storage Temperature | -40°C ~ 85°C℃ , RH95％ MAX |
| Waterproof Rating | IP69K |
| Image Device | 1/2.8" CMOS |
| FPS | 25~30 |
| Video Output | AHD |
| Communication Interface | IO Warning/USB/RS232/RJ45 |
| Resolution | 1920 (H) x 1080 (V) |
| Pixel size | 2.8 μm x 2.8 μm |
| Scanning System | Progressive Scanning |
| Sync System | Internal |
| AGC | Auto |
| White Balance | Auto |
| BLC | Auto |
| Supply Voltage | DC10V~32V |
| Audio Output | Warning sound signal output |
| Horizontal Viewing Angle | 140° |
✧ Installation
✧ Wiring Diagram
✧ Function:
☛ Left blind zone:
When a moving vehicle is detected approaching within the blind zone on the left rear
of the vehicle, the left LED indicator will be lit.
If the corresponding turning signal is turned on when there’s vehicle being detected, the
LED indicator will blinker and buzzer beep 3 times.
☛ Right blind zone:
When a moving vehicle is detected approaching within the blind zone on the right rear
of the vehicle, the right LED indicator will be lit.
If the corresponding turning signal is turned on when there’s vehicle being detected, the
LED indicator will blinker and buzzer beep 3 times.
To be safety, follow Super Unitech Sensor
Don’t miss our future updates! Get Subscribed Today!
©2023. Unitech Sensor. All Rights Reserved.
We will contact you within 1 working day, please pay attention to your inbox.